other

New energy step battery and temperature sensor

February 22 , 2023
         The recycling of lithium batteries refers to the centralized recycling of lithium batteries that are about to be scrapped, and the recycling of batteries through physical, chemical and other recycling processes, or the extraction of valuable metal elements in batteries, and the re-application of lithium batteries and other fields.
The internal development of the battery recycling industry in the future will show the following two trends: (1) lithium battery recycling and processing enterprises extend to the field of raw materials such as downstream three-way batteries; (2) The business cooperation mode between professional recycling and processing enterprises and vehicle manufacturing enterprises is gradually mature.
Hot spot 1: Power lithium battery is about to enter the large-scale replacement stage. When the life of lithium battery decreases below 80%, it will be difficult to fully meet the normal power demand of automobile, because the electrochemical performance of battery will decline significantly, and the battery will enter the routine replacement stage, so a large number of waste lithium battery is expected to give birth to a huge recycling battery market.
Hot spot 2: lithium battery recycling has economic benefits. "Battery production - battery utilization - battery recycling - battery production", this is lithium battery recycling treatment and reuse to form a good ecological chain cycle.
1. Power battery recycling industry chain: China's power lithium battery recycling industry chain is divided into upper, middle and downstream: upstream main body -- raw material supply enterprises (waste lithium battery suppliers, metal waste suppliers, auxiliary material suppliers, etc.); The main body of midstream -- lithium battery recycling and processing enterprises (specialized recycling and processing enterprises, energy storage enterprises and battery manufacturing enterprises, etc.); Downstream main body - battery material manufacturing, powder metallurgy and other fields of enterprises.
2, and temperature sensor: power battery, if the choice of physical means recovery, step use, after re-detection, reassembly and other processes, then the output of energy storage lithium battery, low-speed electric vehicle lithium battery. In order to properly solve the subsequent thermal runaway problem, we suggest replacing the new NTC temperature sensor when the power battery is used in steps.
No matter the battery pack is damaged or collided, the internal structure, performance or other thermal management system of the battery or the failure of the air conditioning system may lead to thermal runaway. While charging, driving, placing process, collision caused by rollover and wading caused by soaking, many accidents point to the battery thermal runaway problem. The temperature monitoring of the thermal management system of the power battery is a factor that can not be ignored to ensure the safety of new energy vehicles. The thermal management system is mainly responsible for temperature control, which is controlled by the vehicle controller to ensure that the battery is maintained at a reasonable temperature. When the battery pack temperature is abnormal, the air conditioner system dissipates or heats the battery in time to ensure battery safety and service life. Usually, the temperature sensor of NTC thermistor is used to collect and monitor the temperature of the power battery module. Because the response of NTC resistance to temperature change is usually linear. When continuous linear changes in resistance and temperature are required, such as temperature compensation, temperature control systems, and surge current limiting, NTC thermistors are appropriate.
A general power battery module consists of a plurality of cells. In normal operation, the degree of the cell is uniform. When abnormal, the temperature of different battery modules will show a large temperature difference. Therefore, we give the power battery NTC thermistor program, that is, the battery temperature management program, to achieve monitoring.
Battery temperature management includes the temperature detection of the battery body, the temperature detection of the battery cooling medium and the temperature detection of the BMS control board. Usually 3 to 4 collection points are selected to monitor the temperature of the whole power battery module. After the collected temperature data is input to the power battery module management unit, the power battery module management unit calculates the temperature of the whole power battery module management unit.
laat een bericht achter
enige informatie gewenst? laat hier een bericht achter alstublieft .

thuis

producten

over

contact